Nortel DMS-100 Series Maintenance Manual page 200

6-40 Star Remote System user interface
Table 6-21 Subscriber loop testing capabilities of the UMP or LMU (Sheet 2 of
2)
Feature
Capacitance measurement
DC signature measurement
Note: x means testing capability supported by the UMP or LMU.- means testing
capabililty not supported by the UMP or LMU.
LTPDATA level
The following table contains a list of LTPDATA commands used to maintain
control position data, posted set information, system status updates, and
perform additional maintenance action on lines in the control position.
Table 6-22 LTPDATA level commands
Command Supported?
QUIT Yes
POST Yes
SUSTATE Yes
LOOPBK Yes
BERT Yes
EQUIP (see No
note)
CONNECT (see No
note)
BPVO (see note) No
HOLD Yes
NEXT Yes
BERTTIME Yes
(non-menu)
Note: These tests are only applicable to Datapath lines.
297-8353-550 Standard 05.01 March 2001
ISDN
x
x
Line types
ISDN
ISDN
ISDN, MBS
ISDN
ISDN
Not applicable
Not applicable
Not applicable
All
All
ISDN
POTS
x
x (only on lines
connected to the
Star Module)
Configuration dependent?
No
No
No
Yes
Yes
Not applicable
Not applicable
Not applicable
No
No
No