Nortel DMS-100 Series Maintenance Manual page 440

12-92 Star Remote System card replacement procedures
NTMX81
in a STAR
(continued)
15
Mapping Star Module ports to DS-1 slot and port numbers (Sheet 1 of 2)
Star Module Star Hub DS-1
and link slot and port
numbers numbers
Module 0 link 0 Slot 9, port 0
Module 0 link 1 Slot 15, port 0
Module 1 link 0 Slot 9, port 1
Module 1 link 1 Slot 15, port 1
Module 2 link 0 Slot 9, port 2
Module 2 link 1 Slot 15, port 2
Module 3 link 0 Slot 9, port 3
Module 3 link 1 Slot 15, port 3
Module 4 link 0 Slot 9, port 4
Module 4 link 1 Slot 15, port 4
Module 5 link 0 Slot 9, port 5
Module 5 link 1 Slot 15, port 5
Module 6 link 0 Slot 9, port 6
Module 6 link 1 Slot 15, port 6
297-8353-550 Standard 05.01 March 2001
and press the Enter key.
Example of a MAP response
Port 16: HUB Owner Unit 0 RLD 8 Link 0; Cap MS; Status: SysB
Port 17: HUB Owner Unit 1 RLD 8 Link 1; Cap MS; Status: InSv
Use the following table and figure to determine which NTMX81 card to
remove by matching the provisioned link number with the slot number.
Note: When replacing an NTMX81 card at the Star Hub, determine if the
RLDs affected by the card change have one or two DS-1 links. If the RLDs
have one link, then each RLD must be posted, busied, and returned to
service. If the RLD has two DS-1 links, the system automatically returns
to service the DS-1 link.
Star Hub
P-side
port
numbers
0
1
2
3
4
5
6
7
8
9
10
11
12
13
Star Hub DS-1
Star Module and slot and port
link numbers numbers
Module 8 link 0 Slot 10, port 8
Module 8 link 1 Slot 14, port 8
Module 9 link 0 Slot 10, port 9
Module 9 link 1 Slot 14, port 9
Module 10 link 0 Slot 10, port 10
Module 10 link 1 Slot 14, port 10
Module 11 link 0 Slot 10, port 11
Module 11 link 1 Slot 14, port 11
Module 12 link 0 Slot 10, port 12
Module 12 link 1 Slot 14, port 12
Module 13 link 0 Slot 10, port 13
Module 13 link 1 Slot 14, port 13
Module 14 link 0 Slot 10, port 14
Module 14 link 1 Slot 14, port 14
Star Hub
P-side
port
numbers
16
17
18
19
20
21
22
23
24
25
26
27
28
29