Nortel DMS-100 Series Maintenance Manual page 549

8
Open the locking levers on the replacement card. Align the card with the slots
in the shelf and gently slide the card into the shelf.
9 Seat and lock the card.
a Using your fingers or thumbs, push on the upper and lower edges of the
faceplate to ensure the card is fully seated in the shelf.
b Close the locking levers.
Star Remote System card replacement procedures
DANGER
Improper insertion may damage circuit packs
Do not apply direct pressure to the components.Do not force
the cards into the slots.
DMS-100 Family NA100 Star Remote System XPM15 and up
Replacing a card
STAR or RLD
(continued)
12-201