Rld Level User Interface - Nortel DMS-100 Series Maintenance Manual

6-16 Star Remote System user interface

RLD level user interface

Operating company personnel use the RLD level of the MAP display to
monitor and maintain the Star Module (or remote line drawer). The RLD
command accesses the RLD level. The RLD level only appears when a STAR
is posted and at least one Star Module is defined in table LCMDRINV.
The RLD is accessed by entering RLD at the STAR level. The following figure
shows a normal response at the MAP display when posting a STAR. The line
drawers in reverse video represent the Star Module.
Figure 6-7 Posting a Star Module at the RLD level
CM MS
. .
RLD
0 Quit
2 Post_
3 ListSet
4
5 Trnsl
6 Tst_
7 Bsy_
8 RTS_
9 Offl_
10 LoadRLD_
11
12 Next
13
14 QueryRLD
15 QueryPES
16 QueryCH
17 SwBnk_
18
userid
TIME hh : mm>
In the previous figure, the MAP display shows that Module 8 is posted and
includes logical drawers 16 and 17. The Star Module is InSv and both logical
drawers indicate they are in the InSv state by the dots in reverse video.
Note: Maintenance operations are not supported on one Star Module
logical drawer (line subgroup). Maintenance operations can only be
performed on a physical Star Module, that is, on both logical drawers (line
subgroups). Therefore, an RLD is posted by the drawer number that appears
in the STAR line drawer display. As in the previous example, access
Module 8 by entering POST 16 at the RLD level.
297-8353-550 Standard 05.01 March 2001
IOD Net PM CCS
. . 4 SysB
M
SysB
PM 4
STAR 0
STAR REM1 00 0 Istb Links_OOS: CSide 0 PSide 0 UMP OOS:0
Unit 0: ISTb
Unit 1: ManB
Drwr: 11 11 11 11 11 22 22 22 22 22 33 33 33
01 23 45 67 89 01 23 45 67 89 01 23 45 67 89 01 23 45
MM .M –– –– –– –– –– –o .. –– –– –– –– –– –– –– –– ––
REM9 RLD DRWR 8
BANK_0: Active
BANK_1: Stby
Lns Trks
. . .
ManB OffL
0 10
0 0
/RG: 0
/RG: 0
Ext Appl
. .
CBsy ISTb
3 3
0 1
RG
Pref 0 InSv
Stby 1 InSv
LogDrwr: 16 17
Links_OOS: 2
RLD BDch: –
InSv
3
1