Nortel DMS-100 Series Maintenance Manual page 524

12-176 Star Remote System card replacement procedures
NTTR76
in a STAR
(end)
22
23
24
25
26
27
297-8353-550 Standard 05.01 March 2001
unit
is the STAR unit (0 or 1) that was busied in step 5
If RTS
passes
fails and a card list appears (an
alarm condition exists)
Turn REX tst back on by typing
>tst rex on
and press the enter key. The MAP response should be
STAR SHUB 00 0 REX test is ON
Send any faulty cards for repair according to local procedure.
Record the following items in office records:
• date the card was replaced
• serial number of the card
• indications that prompted replacement of the card
Proceed to step 27.
Get additional help by contacting the personnel responsible for higher level of
support.
If alarms are displayed, proceed to the appropriate alarm clearing procedure
in this manual.
You have correctly completed this procedure.
Do
step 23
step 26