Nortel DMS-100 Series Maintenance Manual page 168

6-8 Star Remote System user interface
Table 6-4 Overview of STAR commands (Sheet 2 of 2)
Command Function
LOADPM Load PM
NEXT Next
OFFL Offline
POST Post
QUERYPM Query PM
QUIT Quit
PES Power and
environmental
system
RLD Remote line
drawer
RLDCarr RLD carrier
RTS Return to service
SWRG Switch ringing
generator
TRNSL Translate
TST Test
297-8353-550 Standard 05.01 March 2001
Description
Loads software and data into one or both units of a posted
Star Hub.
Posts the next Star Hub in a displayed set.
Sets a posted Star Hub offline.
Posts a specific Star Hub, all Star Hubs in a specified state,
or Star Hub peripherals as a group.
Displays information about a posted Star Hub, including
physical location, node number, associated peripheral load
name, and any associated faults. Also displays information
about faults when used with the FLT option, and information
about the diagnostic history when used with the DIAGHIST
option.
Options CNTRS and DRWR can also be used.
Quits the current PM level of the MAP terminal or cancels a
Star Hub selection.
Acccess the power and environmental system (PES) level.
This command appears only when an RLD has been
datafilled on the host switch and the RLD is in a Star Remote
Module Outside (SRMO) cabinet.
Accesses the RLD level where maintenace commands
reside to maintain the RLD. This command appears only
when an RLD has been datafilled on the host switch.
Accesses the RLDCarr level where maintenace commands
reside to maintain DS-1 links connecting the Star Module to
the Star Hub. This command appears only when an RLD is
datafilled on the host switch.
Returns to service, one or both units of a posted Star Hub or
drawers.
Causes the ringing generator that is serving the specified unit
of a specified Star Hub to be switched to serve the other unit.
Displays information about the interface links between the
Star Hub and the Host.
Tests one or both units of a posted Star Hub.