Nortel DMS-100 Series Maintenance Manual page 431

If the RTS command
fails
25 Repeat step 24 for the other logical drawer in the pair.
26 Update table LCMDRINV.
Note: Make sure you have the new MAC address from the replacement
card as recorded in step 2.
a To open table LCMDRINV, type
>TABLE
and press the Enter key.
b To position on the tuple for the STAR, type
>POS site_name
and press the Enter key.
where
site_name
is the name of the site
frame_no
is the number of the frame
lcm_no
is the number of the STAR
c To begin changing the tuple, type
>CHA
and press the Enter key.
d To continue processing, type
>Y
and press the Enter key.
e Press the Enter key to scroll through the fields until you access the field
with the MAC address.
f Enter the new MAC address. Type
>drwr_id
and press the Enter key.
where
drwr_id
is the physical number of the drawer
card_pec
is NTEX54AA, NTEX54AB, NTEX54BA, or NTEX54CA
drwr_pec
is the PEC of the drawer
Star Remote System card replacement procedures
LCMDRINV
frame_no
card_pec drwr_pec mac_address ip_address
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR
(continued)
Do
step 39
lcm_no
12-83
NTEX54