Nortel DMS-100 Series Maintenance Manual page 447

and press the Enter key.
If RTS
passes and there are no more
RLDs to RTS
passes and there is another RLD
to return to service
fails
31 Send any cards with faults for repair according to local procedure.
32 Record the following items in office records
• date the card was replaced
• serial number of the card
• indications that prompted replacement of the card
Go to step 35.
33 Return to "Star Remote System alarm clearing procedures" in this manual or
another procedure that directed you to this procedure. At the point where a
faulty card list was produced, identify the next faulty card on the list and go to
the appropriate card replacement procedure for that card in this manual.
34 Get additional help replacing this card by contacting the personnel
responsible for a higher level support.
35 You have correctly completed this procedure. Remove the sign from the
active unit and return to the maintenance procedure that directed you to this
card replacement procedure and continue as directed.
Star Remote System card replacement procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR
Do
step 31
step 28
step 34
12-99
NTMX81
(end)