Nortel DMS-100 Series Maintenance Manual page 194

6-34 Star Remote System user interface
Table 6-15 Line diagnostics functionality for POTS and P-phone lines (Sheet 2
of 2)
Test
Test access relay
Subscriber loop (note 5)
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
The following table lists the diagnostics performed as part of the line card
diagnostic using the LTP level DIAG command for ISDN lines.
Table 6-16 Line diagnostics functionality for ISDN lines (Sheet 1 of 2)
Test
PUPS 5V power failure
Line card occupancy
DR stuck
Relay
BF stuck
Line card restore
Self test
NT1 restore test
Status
U-loop
Termination
Sealing current
NEBE
FEBE
297-8353-550 Standard 05.01 March 2001
This test requires the NT6X99AA IBERT line card.
This test is for the NT6X18BA.
This test is for the NT6X18AB.
This test requires that table OFCOPT parameter NRTEST is set to Y.
This test is only run if one of the prior tests failed.
Line card
type
Y Y
Y