Nortel DMS-100 Series Maintenance Manual page 535

and press the Enter key.
Example of a MAP response
LINK 0
LINK 1
LINK 2
LINK 3
LINK 4
LINK 5
6 To busy the inactive STAR unit, type
>bsy unit unit_no
and press the Enter key.
where
unit_no
is the number of the inactive unit (unit 0 or 1)
7 From the display in step 5, determine the C-side host PM where the STAR is
connected. To post the host PM, type
>POST pm_type pm_no
and press the Enter key.
where
pm_type
is the host PM type, such as LTC, LGC, RCC2
pm_no
is the number of the host PM
Example of a MAP display:
SysB
PM 0
LTC 0
LTC 0 ISTb
Unit0: Act InSv
Unit1: Inact InSv
8 To display the P-side link information for the host PM, type
>TRNSL P
and press the Enter key.
Example of a MAP response
LINK 0: STAR REM1 00 0 0;CAP
LINK 1: STAR REM1 00 0 1;CAP
LINK 2: STAR REM1 00 0 0;CAP
LINK 3: STAR REM1 00 0 1;CAP
LINK 4: STAR REM1 00 0 0;CAP
LINK 5: STAR REM1 00 0 1;CAP
LINK 6: STAR REM1 00 0 0;CAP
LINK 7: STAR REM1 00 0 1;CAP
Star Remote System card replacement procedures
LTC 0 0;CAP MS: STATUS SysB MSGCOND CLS RESTRICT
LTC 0 1;CAP
LTC 0 2;CAP MS: STATUS OK MSGCOND OPN UNRESTRICT
LTC 0 3;CAP
LTC 0 4;CAP
LTC 0 5;CAP
ManB OffL
0
0
Links_OOS: CSide
MS:STATUS OK
MS:STATUS SBsy MSGCOND: CLS
MS:STATUS OK
MS:STATUS OK
MS:STATUS OK
MS:STATUS OK
MS:STATUS SBsy MSGCOND: CLS
MS:STATUS OK MSGCOND: OPN
DMS-100 Family NA100 Star Remote System XPM15 and up
in a STAR
S: STATUS SysB
S: STATUS OK
S: STATUS SysB
S: STATUS SysB
CBsy
1 0
2 0
0, PSide
MSGCOND: OPN
MSGCOND: OPN
MSGCOND: OPN
MSGCOND: OPN
MSGCOND: OPN
12-187
NTTR87
(continued)
ISTb In
4 1
2
4