Nortel DMS-100 Series Maintenance Manual page 562

13-4 Star Remote System routine maintenance procedures
Battery inspection and cleaning
Star Module
(end)
Battery inspection and cleaning
At the SRME or SRMO cabinet
1
2
3
4
5
6
7
8
297-8353-550 Standard 05.01 March 2001
DANGER
Hazardous chemicals
Battery chemicals can be hazardous and potentially
explosive. Use caution.
Inspect batteries, connectors, floor, and shelves for moisture or corrosion.
If moisture or corrosion is
present
not present
Disconnect the battery connector from the TSS Backplane.
Disconnect the battery fuse connector and remove the battery from the shelf.
Clean the affected areas with baking soda and water. Continue until the
cleaning solution no longer foams when it is applied.
Completely dry all cleaned areas and replace the batteries.
Connect the batteries to the system and connect the battery fuse connector.
Connect the batteries connector to the TSS Backplane.
You have correctly completed this inspection procedure.
Do
step 3
step 8