Nortel DMS-100 Series Maintenance Manual page 323

If the fault indicated is
RLD babbling
System busy over CM restart
No response from RLD
RLD fault message received
from Star Hub
C-side (Star Hub) RTS
At the MAP terminal
49 Busy the STAR unit associated with the alarm. To busy the STAR unit, type
>BSY UNIT star_unit
and press the Enter key.
where
star_unit
is the STAR unit to be busied (0 or 1)
50 To test the busied unit, type
>TST UNIT star_unit
and press the Enter key.
where
star_unit
is the STAR unit to be tested (0 or 1)
If test
passed
failed, and a card list is produced step 52
failed, but no card list is pro-
duced
51 To try to return the STAR to service, type
>RTS UNIT star_unit
and press the Enter key.
where
Star Remote System alarm clearing procedures
DMS-100 Family NA100 Star Remote System XPM15 and up
minor
Do
step 24
Wait for CM restart to clear.
step 39
step 24
Wait for RTS of STAR to com-
plete.
Do
step 51
step 59
11-57
PM STAR
(continued)