Nortel DMS-100 Series Maintenance Manual page 210

7-6 Star Remote System manual maintenance
Table 7-4 Power converter half configuration (Sheet 2 of 2)
Power
convertor in
slot 3
Failed
Installed
The following table lists the RTS actions of the Star Hub units, based on the
states of the power converters in the Star Hub.
Table 7-5 Power converter half configuration, RTS process
Power
convterter
in slot 3
Installed
Not installed
Installed
Failed
Failed
Installed
The followng table identifies the alarms visible at the MAP terminal for a Star
Hub with four power converters. The alarms raised are based on the states of
the power converters.
Table 7-6 Power converter full configuration unit status (Sheet 1 of 2)
Power Power
convertor converter
in slot 3 in slot 20
Installed Installed
Not Installed
installed
Installed Not
installed
Installed Installed
297-8353-550 Standard 05.01 March 2001
Power
converter in
slot 20
Installed
Failed
Power
converter in
slot 20
Installed
Installed
Not installed
Failed
Installed
Failed
Power Power
convertor converter
in slot 5 in slot 18
Installed Installed
Installed Installed
Installed Installed
Not Installed
installed
Unit 0 Unit 1
ISTb ISTb
ISTb ISTb
RTS, Unit 0
RTS passed, InSv
RTS failed
RTS passed, InSv
RTS failed
RTS passed, ISTb
RTS passed, ISTb
Unit 0
InSv
SysB
InSv
SysB
Alarms
Major
Major
RTS, Unit 1
RTS passed, InSv
RTS passed, InSv
RTS failed
RTS failed
RTS passed, ISTb
RTS passed, ISTb
Unit 1 Alarms
InSv No
InSv Critical
SysB Critical
InSv Critical