Nortel DMS-100 Series Maintenance Manual page 544

12-196 Star Remote System card replacement procedures
NTTR87
in a STAR
(end)
30
31
32
33
34
35
297-8353-550 Standard 05.01 March 2001
To return the RLD to service, type
>RTS DRWR
and press the Enter key.
If RTS
passes and there are no more
RLDs to RTS
passes and there are more RLDs
to return to service
fails
Send any cards with faults for repair according to local procedure.
Record the following items in office records
• date the card was replaced
• serial number of the card
• indications that prompted replacement of the card
Go to step 35.
Return to "Star Remote System alarm clearing procedures" in this manual or
the other procedure that directed you to this procedure. At the point where a
faulty card list was produced, identify the next faulty card on the list and go to
the appropriate card replacement procedure for that card in this manual.
Get additional help in replacing this card by contacting the personnel
responsible for a higher level of support.
You have correctly completed this procedure. Remove the sign from the
active unit and return to the maintenance procedure that directed you to this
card replacement procedure and continue as directed.
Do
step 31
step 28
step 34