Saving the Toolpath (CMB file)
Now that the part file is sliced and ready to send to the 360mc/400mc, it must
be saved as a.CMB file, which can be received by the system.
1.
Click File>Save As>Toolpath
2.
Enter the File Name and Directory. Click Save.
Flag Button Shortcut
The Flag button
the following procedures:
• Slice the Part
• Build Supports and a Base for the Part
• Save the Job File
• Create Toolpaths
• Save the Toolpath (.CMB file)
5-6
FORTUS 360mc/400mc and FDM 360mc/400mc User Guide
Figure 5-6: Saving Toolpath Information
can be used as an automated shortcut to performing
(Figure
5-6).