Saving The Toolpath (Cmb File); Flag Button Shortcut - Stratasys Fortus 360mc User Manual

Saving the Toolpath (CMB file)

Now that the part file is sliced and ready to send to the 360mc/400mc, it must be
saved as a.CMB file, which can be received by the system.
1.
Click File>Save As>Toolpath.
2.
Enter the File Name and Directory. Click Save.

Flag Button Shortcut

The Flag button
following procedures:
• Slice the Part
• Build Supports and a Base for the Part
• Save the Job File
• Create Toolpaths
• Save the Toolpath (.CMB file)
Figure 5-6: Saving Toolpath Information
can be used as an automated shortcut to performing the
5-6
(Figure 5-6)