Connecting A Monitoring Cable To Tp483000D/Tp482000B; Connecting A Monitoring Cable To An Ibox - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Figure 4-18 FE communications port
Step 2 Connect the other end of the network cable to the Ethernet port on the LAN
switch.
----End
4.2.9 Connecting a Monitoring Cable to TP483000D/
TP482000B
Prerequisites
A network cable used for monitoring is prepared.
Procedure
Step 1 Connect one end of the network cable to the FE port on TP483000D/TP482000B.
Step 2 Connect the other end of the network cable to the Ethernet port on the LAN
switch.
----End

4.2.10 Connecting a Monitoring Cable to an iBOX

Prerequisites
A network cable used for monitoring is prepared.
Procedure
Step 1 Connect one end of the network cable to the PoE port on the iBOX.
Step 2 Connect the other end of the network cable to the Ethernet port on the LAN
switch.
----End
Issue 02 (2021-05-12) Copyright © Huawei Technologies Co., Ltd.
4 Connecting Monitoring Cables to Devices
88