Replacing A Double-Door Magnetic Lock - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Step 7 Set the address of the access controller using the DIP switch, as shown in
7-19.
Table 7-19 Setting the address of the access controller
Address Value
0
1
2
3
Step 8 Set the baud rate of the access controller to 19200. The preset data bit, stop bit,
and check bit are 8, 1, and none respectively.
----End

7.2.6.2 Replacing a Double-Door Magnetic Lock

Prerequisites
●
●
Context
Prepare magnetic locks of the same model.
Recommended tools and materials: crimping tool, Phillips screwdriver, hex key
(delivered with the product package), step ladder (2 m).
Procedure
Step 1 Remove the cover of the magnetic lock, as shown in
Issue 02 (2021-05-12)
A double-door magnetic lock needs to be replaced.
Spare magnetic locks of the same model are available and functional.
Copyright © Huawei Technologies Co., Ltd.
Toggle Switch 1
OFF
ON
OFF
ON
7 Device Maintenance
Table
Toggle Switch 2
OFF
OFF
ON
ON
Figure 7-27.
307