Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual page 186

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
IVS1800 configuration, see the Configuration Guide. For details, see the
documentation delivered with the device or obtain the documentation by referring
to the "Reference Documentation" section.
The PC for logging in to the client and the IVS are on the same network.
Context
A default IP address has been configured for the IVS1800 before delivery. Modify
the IP address based on the actual network plan.
Procedure
Step 1 Enter https://
In the URL,
address is 192.168.3.111.
Step 2 Log in to the OMU portal. Set the service system and operating system passwords
at the first login.
1.
2.
3.
4.
Step 3 Configure disk initialization.
1.
Issue 02 (2021-05-12)
IP address :8443 in the address box, and press Enter.
IP address indicates the IP address of the IVS1800. The default IP
NO TE
The OMU Portal supports Internet Explorer 10.0 and later versions.
Setting the password for the admin user of the service system
Setting the password for the admin user of the operating system
Setting the password for the root user of the operating system
Enter the user name and password to log in to the OMU portal again. The
following figure shows the home page after a successful login.
Figure 6-24 OMU portal home page
NO TE
Recording data can be stored only after you install and initialize the disks.
Choose Local Configuration > Local Disk.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
175