Creating A Pdu On The Neteco - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Step 3 Choose Communication.
1.
2.
----End

6.4.6.3 Creating a PDU on the NetEco

This section describes how to create a PDU on the NetEco.
Prerequisites
●
●
Procedure
Step 1 Log in to the NetEco client.
Step 2 On the main menu, choose Device Management > Configuration > Planning
Configuration.
Step 3 Choose the management domain where you want to create a device from the
navigation tree on the left.
Step 4 In the lower-left corner of the page, click the Device tab.
Step 5 In the Device area, select PDU from the drop-down list box.
Step 6 Select the device to be added and drag its icon to the management domain.
Step 7 Click the device. In the device parameter area on the right, set device parameters
according to the following table.
Table 6-18 Modbus-TCP device parameter description
Parameter
Managed Object
Name
IP
Issue 02 (2021-05-12)
NO TE
The preset user name and password for the PDU8000 are admin and 000001 respectively.
To ensure access security, change the password upon the first login.
Set IP address assign to Manual, and set IP address, Subnet mask, and
Gateway.
Set SSL to Enable and ModbusTCPcertification to Enable.
You have the operation rights for Planning Configuration.
You have created a management domain for the device to be added on the
Planning Configuration page.
NO TE
To delete a device, click the device and choose Delete under
Description
Device name
Device IP address
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
.
215