iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
----End
6.5.2.1.5 Creating the Water Sensor on the NetEco
This section describes how to create Water Sensor icons to bind the managed
objects, indicators, and alarms.
Prerequisites
You have the operation rights for configuring View.
Procedure
Step 1 Log in to the NetEco client.
Step 2 Choose Device Management > Device View > View from the main menu.
Step 3 On the View page, double-click the equipment room where the water sensor is
deployed.
Step 4 Click
Issue 02 (2021-05-12)
Figure 6-75 Extended Properties
on the toolbar on the left. The Toolbox dialog box is displayed.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
248