Creating An Ecc800-Pro Collector On The Neteco - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Table 6-30 NetEco parameters
Path
System
Settings >
NMS
Application
> NetEco >
Communicat
ion
Parameters
Table 6-31 Setting an authentication password
Path
System
Settings >
NMS
Application
> NetEco >
Set
Authenticati
on Password
Step 4 Click Submit.
----End

6.5.1.6 Creating an ECC800-Pro Collector on the NetEco

This section describes how to create an ECC800-Pro collector on the NetEco.
Prerequisites
●
●
Issue 02 (2021-05-12)
Parameter
Server IP
Port number
Network port
for link setup
Parameter
Authenticatio
n password
Confirm
authenticatio
n password
You have created a smart module or container in Planning Configuration.
The IP address of the NetEco connected has been configured on the ECC800-
Pro WebUI.
Copyright © Huawei Technologies Co., Ltd.
Default Setting
Value
192.168.8. IP address of the primary NetEco
11 server
NOTE
The NetEco IP address and the ECC800-
Pro IP address must be configured in
the same network to ensure normal
connection between the NetEco and
the ECC800-Pro.
31220 31220
WAN_1 WAN_1
Default Setting
Value
Modifyme Set this parameter based on
_123 customer requirements.
NOTE
Requirements for setting passwords:
'a~z','A~Z','0~9','~!@#^*_={}:,./?-`
$'(8-32 characters that include at least
three of the following types: lowercase
letters, uppercase letters, digits, and
special characters)
- -
6 Adding Devices
234