Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual page 315

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
2.
3.
4.
Issue 02 (2021-05-12)
Figure 7-21 Installing hard disks
Insert the hard disk tray back at 45 degrees with the opening of its locking
buckle facing downwards, hold the screw in the red-framed part to lower the
hard disk tray until it is level, and fasten the black screws on the left and right
sides and the white screw on the top.
Figure 7-22 Fastening the screw on the panel and the screws on the hard disk
tray
Connect data and power cables to hard disks. Connect hard disk cable ports
P0–P3 to hard disks on the lower-layer hard disk tray and ports P4–P7 to hard
disks on the upper-layer.
Figure 7-23 Connecting data and power cables to hard disks
Close the chassis cover, and use a PH2 screwdriver to fasten the rear screws.
Copyright © Huawei Technologies Co., Ltd.
7 Device Maintenance
304