Adding A Smart Cooling Product; Setting Monitoring Parameters For The Smart Cooling Product (Over Modbus-Tcp) - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Prerequisites
●
●
●
●
Procedure
Step 1 Log in to the NetEco client.
Step 2 Choose Maintenance Management > Security Protection > Camera
Management from the main menu.
Step 3 In the navigation pane on the left, choose Historical Video.
Step 4 In the Camera List area, select a camera for video playback.
Step 5 In the Time area, set Start Time and End Time for video playback, and click
Query.
Figure 6-39 Setting video playback
Step 6 In the camera list on the right of the page, select the recording file to be viewed.
Step 7 Click
----End

6.4.3 Adding a Smart Cooling Product

6.4.3.1 Setting Monitoring Parameters for the Smart Cooling Product (over
Modbus-TCP)
The method of setting monitoring parameters for NetCol5000-C(065, 080),
NetCol5000-A035/A042/A050/C025/C030, NetCol8000-A060/A120, and
FusionCol8000-E220/E400/C080/C210 are the same.
Issue 02 (2021-05-12)
A server recording plan has been configured on the VCN/IVS client.
Video parameters have been set on the NetEco and cameras have been
connected to the NetEco.
A camera has connected to the VCN/IVS server.
The camera adapter has been installed on the NetEco.
to play back the video.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
188