Adding Devices - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Operation
Deleting a
container

6.1.9 Adding Devices

This section describes the process of adding devices.
Prerequisites
You have the operation rights for Planning Configuration.
Procedure
1.
2.
3.
4.
5.
Issue 02 (2021-05-12)
Description
You can delete one container or multiple containers in
batches on the current page.
NOTE
If a container contains subdevices, you cannot delete it. You can
delete the container only after you delete subdevices in the
container.
● Delete one container.
1. Select a container and click Delete under
2. In the displayed Confirm dialog box, click Yes.
● Delete multiple containers in batches.
1. Click
2. Add filter conditions, select multiple containers, and
3. In the displayed Confirm dialog box, click Yes.
Log in to the NetEco client.
On the main menu, choose Device Management > Configuration >
Planning Configuration.
In area 1, select the management domain to which the device to be added
belongs.
In area 2, click the Device tab, select a device type from the drop-down list
box, and select the device to be added.
Drag the selected device icon to area 3.
Copyright © Huawei Technologies Co., Ltd.
on the toolbar.
click Delete.
6 Adding Devices
.
147