Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual page 164

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
6.
7.
8.
9.
Issue 02 (2021-05-12)
Figure 6-9 Configuring the terminal smart cooling product
Import configuration parameters.
a. Click Import and select Configuration Parameters.
b. In the displayed dialog box, click
configuration parameter template.
c. Open the configuration parameter template and set configuration
parameters.
d. Click to import the edited template file from the local PC.
e. Click Import.
Import algorithm parameters.
a. Click Import and select Algorithm Parameters.
b. In the displayed dialog box, click
algorithm parameter template.
c. Open the configuration parameter template and set configuration
parameters.
d. Click to import the edited template file from the local PC.
e. Click Import.
Click in the upper-left corner of the page to return to the Monitor page.
Click to enable the iCooling energy saving mode.
NO TE
OFF indicates that the iCooling energy saving mode is not enabled, and ON indicates
that the mode is enabled. When the iCooling energy saving mode is enabled, you
cannot configure the terminal smart cooling product, import configuration
parameters, or import algorithm parameters.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
to download the optimization
to download the optimization
153