Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual page 189

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Step 5 Enable camera NTP synchronization.
The camera NTP synchronization function for the server is disabled by default. The
camera NTP synchronization function needs to be enabled for the server that
connects to the camera. After the camera NTP synchronization function is enabled,
cameras will automatically time-synchronize from their access servers.
1.
2.
3.
4.
5.
Step 6 Create a user.
When connecting to the IVS1800 on the NetEco, you need to log in to the VCN as
a non-admin user.
1.
2.
Issue 02 (2021-05-12)
Figure 6-28 Setting the external IP address of the OMU
Log in to the OMU portal as the admin user.
Choose Maintenance > Unified Configuration.
Set Module Name to SCU and Parameter type to System property, and
click Search.
In the search results, click Edit in the row where Parameter Name is NTPIPC
and set Value to 1.
Click Save. After the camera NTP synchronization function is enabled, the
camera, after being connected to the server, will automatically time-
synchronize with the server.
Figure 6-29 Configuring camera NTP synchronization
Log in to the OMU portal as the admin user.
Choose User Management > Add User.
NO TE
When creating a user, you can select Enable account validity period and set Valid from
and Valid to to set the account validity period for the created user.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
178