Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual page 80

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Figure 4-2 Ports on the 2288X V5 server
Table 4-2 2288X V5 server port description
No.
1
2
3
4
5
6
7
8
9
10
11
12
Issue 02 (2021-05-12)
Port Type
eth0 GE port
eth1 GE port
eth2 GE port
eth3 GE port
eth4 GE port
eth5 GE port
eth6 GE port
eth7 GE port
VGA port
USB port
iBMC remote
management
port
Server serial
port
Copyright © Huawei Technologies Co., Ltd.
4 Connecting Monitoring Cables to Devices
Description
Used for connecting to the LAN switch.
● Scenario where the southbound and
northbound networks are not isolated:
Connect eth0 and eth1, which are
configured as bond0 by default, to provide
southbound and northbound services.
Connect eth2 and eth3, which are
configured as bond1 by default, to provide
southbound 2 services.
● Scenario where the southbound and
northbound networks are isolated: Connect
eth0 and eth1, which are configured as
bond0 by default, to provide northbound
services. Connect eth2 and eth3, which are
configured as bond1 by default, to provide
southbound services. Connect eth4 and eth5,
which are configured as bond2 by default, to
provide southbound 2 services.
Reserved.
Used for connecting to a monitor.
Used for connecting to an external device.
Used for connecting to a PC to manage the
2288X V5 server.
Used for connecting to an SMS modem or for
commissioning.
69