Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual page 223

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Parameter
Read Community
Write Community
Table 6-17 SNMPv3 device parameter description
Parameter
Managed Object
Name
IP
Port
Security Name
Authentication
Protocol
Authentication
Password
Privacy Protocol
Issue 02 (2021-05-12)
Description
Set this parameter to the read community set on the device.
It is recommended that the community be modified every
three months.
Set this parameter to the write community set on the
device.
Modifying community per three months is advised.
NO TE
SNMPv1 and SNMPv2 are insecure. SNMPv3 is recommended because it is more secure.
Description
Device name
Set this parameter to the device IP address.
Set this parameter to the port number of the device. (set to
161 by default)
Set this parameter to the user name added in SNMPv3 on
the device.
Set this parameter to the authentication protocol set on the
device. The default selection is SHA.
Support SHA and MD5 agreement.
NOTE
MD5 is an insecure protocol. SHA is recommended.
Set this parameter to the authentication algorithm key
configured on the subdevice.
Value range: a–z, A–Z, 0–9, _ (8–15 characters, at least two
types of characters, different from the user name or its
reverse)
Set this parameter to the privacy protocol set on the device.
The default selection is AES128.
Support CBC_DES, AES128, AES192, and AES256
agreement.
NOTE
DES is an insecure protocol. AES is recommended.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
212