Replacing A Card Reader With A Keypad - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Step 7 Select the new fingerprint and card reader, and click Connection test. When
Connection success is displayed, the replacement is complete.
----End

7.2.6.6 Replacing a Card Reader with a Keypad

Prerequisites
●
●
●
Context
Figure 7-40 Card reader with a keypad
Procedure
Step 1 Remove the screw that secures the card reader with a keypad, and remove the
cable, as shown by (1), (2), and (3) in
Figure 7-41 Removing a bottom plate
Issue 02 (2021-05-12)
Recommended tool: Phillips screwdriver
A card reader with a keypad needs to be replaced.
A spare card reader with a keypad of the same model is available and
functional.
Copyright © Huawei Technologies Co., Ltd.
Figure 7-41.
7 Device Maintenance
316