Adding An Mts9604B-N20B1/Mts9606B-N20C2 Power Supply; Creating A Mts9604B-N20B1/Mts9606B-N20C2 Power Supply On The Neteco - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Parameter
Privacy Protocol
Privacy Password
Step 8 Click
Step 9 Click Connection test to start the connection test.
----End
6.4.7 Adding an MTS9604B-N20B1/MTS9606B-N20C2 Power
Supply
6.4.7.1 Creating a MTS9604B-N20B1/MTS9606B-N20C2 Power Supply on the
NetEco
This section describes how to create a MTS9604B-N20B1/MTS9606B-N20C2 power
supply on the NetEco.
Prerequisites
●
●
●
Procedure
Step 1 Log in to the NetEco client.
Step 2 On the main menu, choose Device Management > Configuration > Planning
Configuration.
Step 3 Choose the management domain where you want to create a device from the
navigation tree on the left.
Issue 02 (2021-05-12)
Description
Set this parameter to the privacy protocol set on the device.
The default selection is AES128.
Support CBC_DES, AES128, AES192, and AES256
agreement.
NOTE
DES is an insecure protocol. AES is recommended.
Set this parameter to the proprietary protocol key
configured on the device.
Value range: a–z, A–Z, 0–9, _ (8–15 characters, at least two
types of characters, different from the user name or its
reverse)
NOTE
You are advised to set Authentication Password and Privacy
Password to different values.
on the toolbar to save the device information.
You have the operation rights for Planning Configuration.
You have created a management domain for the device to be added on the
Planning Configuration page.
The adapter of the MTS9604B-N20B1/MTS9606B-N20C2 power supply has
been installed.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
217