Connecting A Monitoring Cable To An Hpxpdu2000-16-3Ph-24-6-M1 - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Figure 4-57 PDU2000 ports
Step 2 Connect the other end of the network cable to the COM port on the ECC800-Pro
collector or the UIM20A expansion module.
Step 3 (Optional) If multiple PDU2000s need to be cascaded, connect the COM1 or
COM2 port of one PDU2000 to the COM1 or COM2 port on the next PDU2000.
----End

4.3.10.3 Connecting a Monitoring Cable to an HPXPDU2000-16-3PH-24-6-M1

Prerequisites
A network cable used for monitoring is prepared.
Procedure
Step 1 Connect the monitoring cable.
1.
2.
Issue 02 (2021-05-12)
NO TE
A maximum of four PDU2000s can be cascaded.
Connect one end of the network cable to port COM1 or COM2 on the
PDU2000. Figure 4-58
Figure 4-58 PDU2000 ports
Connect the other end of the network cable to the COM port on the ECC800-
Pro collector or the UIM20A expansion module.
Copyright © Huawei Technologies Co., Ltd.
4 Connecting Monitoring Cables to Devices
shows the ports on the PDU2000.
131