Creating An Ibox Collector On The Neteco - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)

6.4.1.2 Creating an iBOX Collector on the NetEco

You can create an iBOX collector by manually creating the iBOX on the NetEco or
by adding a UPS for synchronizing the iBOX to the NetEco.
Prerequisites
●
●
Context
The following operations describe how to manually create an iBOX.
●
Issue 02 (2021-05-12)
Figure 6-19 Parallel Net Join Config
System Settings
Alarm Parameters
Time
IP Address
Certificate
Management
Battery Curve
NetEco
Parallel Net Join
Configuration
Information
You have the operation rights for Planning Configuration.
You have created a management domain for the device to be added on the
Planning Configuration page.
UPS_Huawei_UPS5000E_V1R3C00C01_MODBUSTCP
Copyright © Huawei Technologies Co., Ltd.
Description
Select a device type, and check the alarm name, alarm
enabling, severity, and setting result.
Set the local time zone, date, and time.
Set the IP address, subnet mask, and default gateway
for the iBOX based on the IP address assigned by the
administrator.
Set the web security certificate, Modbus TCP certificate
management, Modbus TCP CA certificate management,
parallel communication certificate management, and
parallel communication CA certificate management
parameters.
Set the battery curve based on the battery brand and
model.
Select the NMS type and restore the default Modbus
TCP authentication password.
Set this parameter when you connect iBOXs in parallel.
6 Adding Devices
163