Scenarios For Connecting The Lan Switch; Adding An Ibox Collector; Setting Parameters On The Ibox Webui - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

Table of Contents

Advertisement

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Parameter
Allow long SMS
messages
Enabled
Step 4 Click Test to check whether the system is properly interconnected with the SMS
modem.
Step 5 Click Apply. In the Warning dialog box, click OK.
----End

6.4 Scenarios for Connecting the LAN Switch

6.4.1 Adding an iBOX Collector

6.4.1.1 Setting Parameters on the iBOX WebUI

The parallel iBOX communication is used to synchronize the analog parameters
and configuration parameters of each iBOX system. It can also be used to
coordinate the measurement of internal resistance so that only one iBAT is
measuring the internal resistance at one time.
Prerequisites
Issue 02 (2021-05-12)
If "Test succeeded." is displayed, they are properly connected. The received
SMS messages are in English.
If no, "Connectivity failed." is displayed. Check that all parameter settings are
correct.
NO TE
If you click only Test, the interconnection status between the system and the mail server
can be tested and the entered parameter values cannot be stored in the database. Only
after you click Apply, all entered parameter values can be stored in the database.
Operating system: Support Windows XP or later
Browser: Internet Explorer 9 or later, FireFox 43 or later, and Chrome 41 or
later
The IP addresses, subnet masks, and gateways for the PC and iBOX are in the
same network segment.
Copyright © Huawei Technologies Co., Ltd.
Description
It is recommended that
long SMS messages be
supported.
If you select No, the
settings are unavailable
and short messages
cannot be sent.
6 Adding Devices
Example
Yes
Yes
158

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents