Installing A Temperature And Humidity Sensor (Bom Number: 33010346) - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Figure 3-24 Installing a smoke detector
Step 3 Align the mounting holes in the smoke detector with its base, and then rotate the
smoke detector until it is secured.
----End
3.7.5 Installing a Temperature and Humidity Sensor (BOM
Number: 33010346)
Prerequisites
A temperature and humidity sensor (BOM number: 33010346) and tools for
installing it have been prepared.
Context
●
●
Preparations
Tool: Phillips screwdriver
Materials: temperature and humidity sensor, temperature and humidity sensor
base
Document: temperature and humidity sensor installation position diagram
Procedure
Step 1 Remove the front cover from the temperature and humidity sensor.
Issue 02 (2021-05-12)
For details about how to install an ambient temperature and humidity sensor
and connect its cables, see shipped documents.
Connect cables to an ambient temperature and humidity sensor before
installation.
Copyright © Huawei Technologies Co., Ltd.
3 Installing Devices
34