Setting Parameters On The Iclient - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
3.
4.
----End

6.4.2.3.2 Setting Parameters on the iClient

Prerequisites
The network communication between the IVS1800 and the camera is normal.
Procedure
Step 1 Install the iClient.
1.
Issue 02 (2021-05-12)
Set Multi-point logins to a value greater than 2.
On the User List page, click Permission Settings next to the new user. You
can select Enable All Device View Rights or select the cameras to be
browsed and queried, obtain the documents delivered with the device or by
referring to the "Reference Documentation" section, set other parameters,
and click Save.
Download the iClient.
You can obtain the iClient in either of the following ways:
Method 1: Obtain the iClient installation program from the OMU portal.
Log in to the OMU portal, click Client Download
upper right corner, and save the installation program to a local
directory.
Method 2 1. Log in to the OMU portal, choose Local Configuration >
Basic Configuration, and view Current version.
2. Log in to https://support.huawei.com/enterprise/, and search
for and choose iClient. In the search result, click the
Software Download tab, click the version and patch number
corresponding to the current version, and download the
software package as required.
Figure 6-30 iClient software package search result
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
in the
179