Installing An In-Room Double-Door Magnetic Lock - Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)

3.9.2 Installing an In-Room Double-Door Magnetic Lock

Context
●
●
Procedure
Step 1 Fold the delivered cutout template along the dotted line by 90 degrees, as shown
by (2) in
Step 2 Close the door, place the cutout template at the midline of the door frame in the
door opening direction, mark the mounting holes, and drill holes, as shown in
Figure
Figure 3-62 Mark the installation position
(1) Door frame
Step 3 Remove the hoisting strip using the delivered hex key.
Issue 02 (2021-05-12)
The magnetic lock supports a double-door that can be rotated open
outwards. The door frame should be over 42 mm thick. A glass door is not
supported.
The cable routes are planned.
Figure 3-62.
3-62.
NO TE
Four hex socket screws need to be removed in this step.
Copyright © Huawei Technologies Co., Ltd.
(2) Cutout template
3 Installing Devices
(3) Door panel
55