Huawei iMaster NetEco V600R021C10 Device Installation And Commissioning Manual page 261

iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
Parameter
Current Alarm
Step 7 In the Extended Properties area, set extended properties.
1.
2.
Issue 02 (2021-05-12)
Configuration Operation
1. Click ... next to Current Alarm. The Select Data dialog
box is displayed.
Figure 6-77 Binding alarms
2. Select the alarm to be bound.
3. Click OK.
NOTE
A maximum of 20 alarms can be bound. After an alarm is bound
to a device, the color of the alarm is displayed on the device if
the alarm is generated on the device.
Click Extended Properties to expand the area.
Set extended properties based on the site requirements.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
250