iMaster NetEco
Device Installation and Commissioning Guide (Data
Center)
5.
6.
Issue 02 (2021-05-12)
–
Record the User Name, MD5/SHA password, and DES/AES password for
using when creating a UPS on the NetEco.
Figure 6-47 Setting SNMPv3 parameters
In the SNMP Trap area, click Add.
In the displayed SNMP Trap dialog box, set SNMP trap parameters, and click
Confirm.
–
Enter the IP address of the NetEco server in the Trap Target Address text
box.
–
Set Trap Port to 162.
Copyright © Huawei Technologies Co., Ltd.
6 Adding Devices
201