Replacing A Double-Door Magnetic Lock - Huawei FusionModule5000 Smart Modular Data Center Maintenance Manual

SmartDC
Maintenance Guide
Step 3 Secure the magnet to the magnet fastener using the screws and washers available in the fitting
bag of the sliding door magnetic lock, as shown by (1) in
Step 4 Take out the magnetic lock and disassemble it, and keep the two screws removed, as shown
by (2) in
Step 5 Use the screws removed in the previous step to secure the disassembled magnetic lock to the
magnetic lock fastener, as shown by (3) in
Figure 6-24 Installing a sliding door magnetic lock
Step 6 Reconnect cables to the magnetic lock based on the labels.
Step 7 Verify that the sliding door magnetic lock can function properly.
----End

6.4.4.5 Replacing a Double-Door Magnetic Lock

Prerequisites
Before disconnecting cables from the double-door magnetic lock, label the cables based on
the corresponding ports.
Impact on the System
The door cannot be controlled by the magnetic lock.
Preparations


Issue 04 (2020-03-25)
Figure 6-24.
Tools: Phillips screwdriver, rubber mallet
Material: magnetic lock
Copyright © Huawei Technologies Co., Ltd.
Figure 6-24.
Figure 6-24.
6 Parts Replacement
64