Installing A Wlds900 Water Sensor - Huawei IDS2000 Dual-Row Aisle Containment Installation Manual

IDS2000 Dual-Row Aisle Containment
Installation Guide (Split-type Skylight, Old-Version
Sliding Door)
Figure 9-22 Installing an infrared sensor base
Step 2 Align the mounting holes on the infrared sensor with the mounting holes on the infrared
sensor base, and then rotate the infrared sensor until it is secured, as shown in
Figure 9-23 Installing an infrared sensor
----End

9.1.11 Installing a WLDS900 Water Sensor

Prerequisites


Issue 02 (2015-06-30)
For details about how to install an infrared sensor and connect cables to it, refer to your delivered
documents.
If air is supplied from under the floor, a cofferdam has been installed around the air
conditioners.
If air is supplied horizontally, the modular data center has been completely installed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Installing Auxiliary Devices
Figure 9-23.
143