Table of Contents
Advertisement
MTS9300A Telecom Power (Claro, Colombia,
MTS9304A-AM10A1)
Installation Guide
Figure 5-3 Connecting a communications cable
(1) RS485/RS232 port on the SMU
----End
5.2.3 NetEco Management
Networking Mode 1: FE Port
Step 1 Connect the FE port on the SMU by using a network cable.
Figure 5-4 Connecting a communications cable (over the FE port)
(1) NetEco terminal
----End
Networking Mode 2: RS485 Port
Step 1 Connect one end of a network cable to the RS485/RS232 port on the SMU.
Step 2 Connect the other end of the cable to the MON0 or MON1 port on Huawei BBU.
Issue 01 (2021-05-30)
Copyright © Huawei Technologies Co., Ltd.
(2) MON1 port on BBU
(2) FE port on the SMU
5 Installing Cables
32
Advertisement
Table of Contents
