Clearing The Epo State; Adding A Smartli - Huawei SmartLi 1.0 User Manual

SmartLi 1.0
User Manual
To trigger EPO, press the external switch connected to the EPO port or remove the
4-pin terminal from the EPO port.

7.4 Clearing the EPO State

Procedure
Step 1 Clear the EPO state. Ensure that the EPO button connected to the external EPO is
not in the EPO state.
Step 2 On the LCD screen, choose Alarms > Clear Faults. In the displayed dialog box, tap
Yes. The Battery cabinet shutdown alarm is cleared successfully.
Figure 7-2 Clearing faults
Step 3 View active alarms and ensure that the Battery cabinet EPO alarm has
disappeared from the alarm list.
----End

7.5 Adding a SmartLi

Prerequisites
For online capacity expansion, you need to configure an external circuit breaker to
control the battery loop.
Context
This section describes how to add a SmartLi to four cabinets in parallel.
Issue 09 (2023-03-26) Copyright © Huawei Digital Power Technologies Co., Ltd.
7 Operations
96