3 Maintenance
3.4.3 Changing oil, gearbox axes 2 and 3
Continued
2
3
4
5
6
152
Action
WARNING
Handling gearbox oil involves several safety
risks. Before proceeding, please read the
safety information in the section
during work with gearbox lubricants (oil or
grease) on page
38.
Remove the oil plug, filling. (Ventilation hole
plug should also be removed.)
Note
Don´t mix Kyodo Yushi TMO 150 with other oil
types!
Refill gearbox with lubricating oil.
The amount of oil to be filled depends on the
amount that was previously drained.
Refit oil plug,filling and ventilation hole plug.
© Copyright 2007-2018 ABB. All rights reserved.
Note
Safety risks
Shown in
Location of oil plugs on
page
149.
Tightening torque: 24 Nm.
Art.no. and total amount are specified
in
Required equipment on page
Shown in
Location of oil plugs on
page
149.
Tightening torque: 24 Nm.
Product manual - IRB 6660
3HAC028197-001 Revision: S
150.