ABB IRB 6660 Product Manual page 91

Cooling fan
The details of the cooling fan are shown in the figure below.
xx0500002158
A
B
C
D
Required equipment
Equipment
Cooling fan
Cabling, cooling fan, axes 1
and 2
Plate for customer connec-
tions
Additional cabling to the
controller
Material set fan axes 1 and
2
Cable harness inside control-
ler
Product manual - IRB 6660
3HAC028197-001 Revision: S
2.3.10 Installation of cooling fan for motors (option)
Fanbox
Attachment screws, fanbox plates (9 pcs)
Groove in the connector
Tightening screws, fanbox (3 pcs)
Article number
3HAC15374-1
3HAC046362-001
3HAC025778-001
-
3HAC023999-001
3HAC025488-001
© Copyright 2007-2018 ABB. All rights reserved.
2 Installation and commissioning
Note
Choose this cabling if equipping the robot
with cooling fans on both axis 1 and 2.
An additional connection plate must be
fitted to the robot base, if not already in-
stalled. The plate is shown in the figure
Plate for customer connections, at base
on page 92.
Specified in section
on page 106.
The set includes:
• fan axes 1 & 2 cable harness
• plate, customer
• attachment screws and nuts.
Continues on next page
Continued
Fan cables (option)
91