ABB IRB 6660 Product Manual page 383

Oil exchange equipment
The following table specifies the recommended equipment for oil exchange.
Description
Oil exchange equipment
Basic tools
The following table specifies the tools in the basic toolkit that are used for the
current robot model. This toolkit is necessary primarily when removing and refitting
the motors.
The tools are also listed directly in the instructions.
Description
Extension 300mm for bits 1/2"
Guide pins M8 x 100
Guide pins M8 x 150
Guide pins M10 x 100
Guide pins M10 x 150
Lifting tool, motor ax 1
Lifting tool, motor ax 2, 3
Removal tool, motor M10x
Removal tool, motor M12x
Rotation tool
Standard toolkit (content described in sec-
tion
Lifting tools
The following table specifies the lifting tools required during several of the service
procedures. The tools may be ordered separately and are also specified directly
in concerned instructions.
Description
Hoisting block
Lifting chain (used together with the hoisting
block)
Support, base and gearbox axis 1
Lifting tool, gearbox axis 1
Product manual - IRB 6660
3HAC028197-001 Revision: S
Art. no.
3HAC021745-001
Standard tools on page 381)
© Copyright 2007-2018 ABB. All rights reserved.
7 Reference information
Note
Includes:
• Vacuum pump with regulator,
hose and coupling
• Couplings and adapters
• Pump (manual) with hose and
coupling
• Graduated measuring glass
• Oil gun
• User instructions.
Qty Art. no.
1 3HAC12342-1
2 3HAC15520-1
2 3HAC15520-2
2 3HAC15521-1
2 3HAC15521-2
1 3HAC14459-1
1 3HAC15534-1
2 3HAC14972-1
Fits motors, axes 6.
Fits motors axes 1, 2 and 3.
1 3HAC17105-1
1 -
Qty Article no.
1
1
1 3HAC15535-1
1 3HAC15556-1
Continues on next page
7.7 Special tools
Continued
383