ABB IRB 6660 Product Manual page 334

4 Repair
4.7.2 Replacing the gearbox, axes 2- 3
Continued
13
14
15
16
17
18
Continues on next page
334
Action
Clean the gearbox of residual grease.
Apply locking liquid in the attachment holes
for the gearbox cover.
Fit the o-ring in the cover.
Refit the cover with its attachment screws
and washers.
Note
Fit the cover so that the arrow on the cover
points upwards!
Refit the motors axes 2-3.
Perform a leakdown test.
© Copyright 2007-2018 ABB. All rights reserved.
Note
Loctite 243.
xx1000001407
M8x35 quality 8.8-A2F (12 pcs)
Tightening torque: 24 Nm
xx1000001408
See Replacing motors, axes 2 and 3 on
page 281
See Performing a leak-down test on
page 174.
Product manual - IRB 6660
3HAC028197-001 Revision: S