4 Repair
4.7.1 Replacing the axis 1 gearbox
Continued
7
8
Continues on next page
320
Action
Lift the gearbox.
Make sure the guide pin in the bottom face of
the gearbox is properly aligned with the base.
Lift gearbox axis 1 onto the guide pins and
lower it carefully to its mounting position.
© Copyright 2007-2018 ABB. All rights reserved.
Note
xx1000001389
xx1000001391
Always use guide pins in pairs!
Product manual - IRB 6660
3HAC028197-001 Revision: S