Fb_Tlsplctoaddon - Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual

Overview of the software
3.3 Sway control function blocks
3.3.2.9

FB_TLSPLCToAddOn

Symbol (FBD representation)
Figure 3-23
Task
The "FB_TLSPLCToAddOn" block reads the input area from the PROFIBUS DP / PROFINET
PN for the DCC_SCTLS2 block and separates the array into words and bits.
Connections
The outputs must be connected using the unit-global variables of the "AddOn" MCC source file
with the inputs of the DCC_SCTLS2 DCC block.
Table 3-27 FB_TLSPLCToAddOn connections
Name
TLS_IO_PIW
b16_CW1
b16_CW2
r64Pos_Cyl_A
r64Pos_Cyl _B
r64Pos_Cyl _C
r64Pos_Cyl _D
i32S_Skew_Extern
r64SetPos_SkewAxis
68
FB_TLSPLCToAddOn
Type Data Unit-global variables of "AddOn"
type
IN Array addon_tls_receive
[0..15]
OF word
OUT WORD TLS_CW1
OUT WORD TLS_CW2
OUT LREAL TLS_rpos_a
OUT LREAL TLS_rpos_b
OUT LREAL TLS_rpos_c
OUT LREAL TLS_rpos_d
OUT DINT TLS_iskew_angle_ext
OUT LREAL TLS_rskewpos_set
Meaning
Input array
for the TLS2 block
Control word 1
Control word 2
Cylinder A position
Cylinder B position
Cylinder C position
Cylinder D position
External skew position for TLS
positioning
Set position of electric skew
drive for external position
mode
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA