Execution System; Saving, Compiling And Checking Consistency - Siemens SIMOTION D4x5-2 DP/PN Operating Instructions Manual

Configuration

5.13 Saving, compiling and checking consistency

5.12

Execution system

The MCC charts in the newly inserted "AddOn" (GSU and STS) and "Camera" (STS only) MCC
source files have to be integrated into the execution system; see screenshot below.
Figure 5-29
5.13 Saving, compiling and checking consistency
The project is compiled and saved when you click on button:
Then press the "Ctrl + Alt + K" key combination to perform a consistency check.
The project should now be free from any errors.
134
Linking the MCC charts into the execution system
.
SC integrated STS, GSU
Operating Instructions, 07/2019, A5E48271265B AA